Phone: +1 758-453-0049
E-mail: info@slbs.org
Bisee, Saint Lucia LC04301

ISO 8132:2022

Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series

Apr 27, 2022

General information

60.60     Apr 27, 2022

ISO

ISO/TC 131/SC 3

International Standard

23.100.20  

English   French  

Buying

Published

Language in which you want to receive the document.

Scope

This document specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa (160 bar) medium series cylinders in accordance with ISO 6020‑1 and for 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑1 and ISO 6022, but this does not limit their application[1].
This document covers the following accessories, identified in accordance with ISO 6099:
—    AP2 — rod clevis, female thread (see Figure 1 and Table 1);
—    AF3 — rod flange, circular (see Figure 2 and Table 2);
—    AB4 — clevis bracket, straight (see Figure 3 and Table 3);
—    AB3 — clevis bracket, in angle (see Figure 4 and Table 4);
—    AT4 — trunnion bracket (see Figure 5 and Table 5);
—    AA4-R — pivot pin, plain bearing (snap ring type) (see Figure 6 and Table 6);
—    AA4-S — pivot pin, plain bearing (split pin type) (see Figure 7 and Table 7);
—    AA6-R — pivot pin, spherical bearing (snap ring type) (see Figure 6 and Table 6);
—    AA6-S — pivot pin, spherical bearing (split pin type) (see Figure 7 and Table 7);
—    AP6 — rod eye spherical, female thread (see Figure 8 and Table 8);
—    AP4 — rod eye plain, female thread (see Figure 9 and Table 9).
These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944.
This document applies only to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.
 
[1]   1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

Life cycle

PREVIOUSLY

Revises
ISO 8132:2014

NOW

PUBLISHED
ISO 8132:2022
60.60 Standard published
Apr 27, 2022

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.

Login