ISO 8132:2014 specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa [160 bar] medium series cylinders in accordance with ISO 6020‑1 and for 25 MPa (250 bar) series cylinders, in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑1 and ISO 6022, but this does not limit their application.
ISO 8132:2014 covers the following accessories, identified in accordance with ISO 6099: AP2 (rod clevis, female thread); AF3 (rod flange, circular); AB4 (clevis bracket, straight); AB3 (clevis bracket, in angle); AT4 (trunnion bracket); AA4-R (pivot pin, plain, cotter pin or snap ring type); AA4-S (pivot pin, plain, split pins); AA6-R (pivot pin, spherical bearing, cotter pin or snap ring type); AA6-S (pivot pin, spherical bearing, split pins); AP6 (rod eye spherical, female thread); AP4 (rod eye plain, female thread).
These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 3322.
ISO 8132:2014 applies only to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.
Revises
ISO 8132:2006
PUBLISHED
ISO 8132:2014
90.92
Standard to be revised
Jul 3, 2020
PUBLISHED
ISO 8132:2022
Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.