Below is a listing of projects past and present carried out by the Saint Lucia Bureau of Standards.
Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method
60.60 Standard published
Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter
90.93 Standard confirmed
Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components
90.93 Standard confirmed
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
90.60 Close of review
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
90.60 Close of review
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
90.60 Close of review
Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
90.93 Standard confirmed
Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
90.93 Standard confirmed
Dense, shaped refractory products — Test methods for products containing carbon
90.93 Standard confirmed
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
90.92 Standard to be revised
Flexible cellular polymeric materials — Determination of creep in compression
90.93 Standard confirmed
Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point
90.92 Standard to be revised
Tools for pressing — Elastomer pressure springs — Part 1: General specification
90.93 Standard confirmed
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
90.93 Standard confirmed
Metallic powders — Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
60.60 Standard published
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
90.20 Standard under periodical review