Below is a listing of projects past and present carried out by the Saint Lucia Bureau of Standards.
Railway rolling stock material — Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock — Quality requirements
90.93 Standard confirmed
Railway rolling stock material — Part 6: Solid wheels for tractive and trailing stock — Technical delivery conditions
90.60 Close of review
Railway rolling stock material — Part 7: Wheelsets for tractive and trailing stock — Quality requirements
90.60 Close of review
Railway rolling stock material — Part 8: Solid wheels for tractive and trailing stock — Dimensional and balancing requirements
90.93 Standard confirmed
Railway rolling stock material — Part 9: Axles for tractive and trailing stock — Dimensional requirements
90.93 Standard confirmed
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
90.93 Standard confirmed
Thermal insulation — Moisture effects on heat transfer — Determination of thermal transmissivity of a moist material
90.93 Standard confirmed
Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method
60.60 Standard published
Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter
90.93 Standard confirmed
Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components
90.93 Standard confirmed
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
90.60 Close of review
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
90.60 Close of review
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
90.60 Close of review
Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
90.93 Standard confirmed
Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
90.93 Standard confirmed
Dense, shaped refractory products — Test methods for products containing carbon
90.93 Standard confirmed
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
90.92 Standard to be revised