Phone: +1 758-453-0049
E-mail: info@slbs.org
Bisee, Saint Lucia LC04301

ISO 10791-1:2015

Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)

Jan 21, 2015

General information

90.60     Jun 4, 2020

ISO

ISO/TC 39/SC 2

International Standard

25.040.10  

English   French  

Buying

Published

Language in which you want to receive the document.

Scope

ISO 10791-1:2015 specifies, with reference to ISO 230 1, the geometric tests for machining centres (or other numerically controlled machines, where applicable) with horizontal spindle (i.e. horizontal Z-axis).
It applies to machining centres having three numerically controlled linear axes (X-axis up to 5 000 mm length, Y-axis up to 3 200 mm length, and Z-axis up to 2 000 mm length), but refers also to supplementary movements, such as those of rotary, tilting, and swivelling tables. Movements other than those mentioned are considered as special features and the relevant tests are not included.
It takes into consideration four possible types of tables, fixed and rotary: horizontal non-rotating tables; tables rotating around a vertical B'-axis; tables rotating around a vertical B'-axis and tilting around a horizontal A'-axis; tables rotating around a horizontal A'-axis and swivelling around a vertical B'-axis.
It does not consider accessory spindle heads, which are covered by ISO 17543-1.
ISO 10791-1:2015 deals only with the verification of geometric accuracy of the machine and does not apply to the testing of the machine operation, which should generally be checked separately. Tests not concerning the pure geometric accuracy of the machine are dealt with in other parts of ISO 10791.

Life cycle

PREVIOUSLY

Revises
ISO 10791-1:1998

NOW

PUBLISHED
ISO 10791-1:2015
90.60 Close of review
Jun 4, 2020

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.

Login