Phone: +1 758-453-0049
E-mail: info@slbs.org
Bisee, Saint Lucia LC04301

ISO 11119-3:2013

Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners

95.99 Withdrawal of Standard   Nov 23, 2020

General information

95.99     Nov 23, 2020

ISO

ISO/TC 58/SC 3

International Standard

23.020.35  

Scope

ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
The cylinders and tubes in ISO 11119-3:2013 are

Type 4 Fully Wrapped Cylinders or Tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends, and
Type 5 Fully Wrapped Cylinders or Tubes without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.

The cylinders are constructed

in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement, and
in the form of two filament wound shells joined together.

Cylinders and tubes manufactured and tested to ISO 11119-3:2013 are not intended to contain toxic, oxidizing or corrosive gases.
ISO 11119-3:2013 is limited to cylinders and tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.
Cylinders and tubes manufactured and tested to ISO 11119-3:2013 have a minimum design life of 15 years.
ISO 11119-3:2013 does not address the design, fitting and performance of removable protective sleeves.

Life cycle

PREVIOUSLY

Revises
ISO 11119-3:2002

NOW

WITHDRAWN
ISO 11119-3:2013
95.99 Withdrawal of Standard
Nov 23, 2020

REVISED BY

PUBLISHED
ISO 11119-3:2020

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.

Login