Below is a listing of projects past and present carried out by the Saint Lucia Bureau of Standards.
Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints
90.93 Standard confirmed
Resistance welding — Procedures for determining the weldability lobe for resistance spot, projection and seam welding
90.93 Standard confirmed
Natural rubber in bales — Amount of bale coating — Determination
90.93 Standard confirmed
Welding consumables — Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels — Classification
60.60 Standard published
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification
90.60 Close of review
Welding consumables — Procurement of filler materials and fluxes
90.93 Standard confirmed
Static design procedure for welded hollow-section joints — Recommendations
90.93 Standard confirmed
Fatigue — Design procedure for welded hollow-section joints — Recommendations
90.93 Standard confirmed
Rubber compounding ingredients — Carbon black (pelletized) — Determination of fines content
90.93 Standard confirmed
Winter-sports equipment — Marking of parts made of polymer materials
90.93 Standard confirmed
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
60.60 Standard published
Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
90.93 Standard confirmed
Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
90.93 Standard confirmed
Mineral and sapphire watch-glasses — Part 1: Dimensions and tolerances
90.93 Standard confirmed
Mineral and sapphire watch-glasses — Part 1: Dimensions and tolerances — Technical Corrigendum 1
90.93 Standard confirmed
Mineral and sapphire watch-glasses — Part 2: Assembly to the case by adhesive or using a gasket
90.93 Standard confirmed
Mineral and sapphire watch-glasses — Part 3: Qualitative criteria and test methods
90.93 Standard confirmed