Below is a listing of projects past and present carried out by the Saint Lucia Bureau of Standards.
Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method
90.93 Standard confirmed
Carbonaceous materials for the production of aluminium — Anodes, cathodes blocks, sidewall blocks and baked ramming pastes — Determination of the thermal conductivity using a comparative method
90.93 Standard confirmed
Carbonaceous materials used in the production of aluminium — Baked anodes — Determination of the reactivity to carbon dioxide — Part 1: Loss in mass method
90.60 Close of review
Carbonaceous materials used in the production of aluminium — Baked anodes — Determination of the reactivity to carbon dioxide — Part 2: Thermogravimetric method
90.93 Standard confirmed
Carbonaceous materials used in the production of aluminium — Baked anodes and sidewall blocks — Determination of the reactivity to air — Part 1: Loss in mass method
90.93 Standard confirmed
Carbonaceous materials used in the production of aluminium — Baked anodes and sidewall blocks — Determination of the reactivity to air — Part 2: Thermogravimetric method
90.93 Standard confirmed
Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles
90.93 Standard confirmed
Plastics — Vertical flame spread determination for film and sheet
90.93 Standard confirmed
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints
90.93 Standard confirmed
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation
60.60 Standard published
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
60.60 Standard published
Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation
60.00 Standard under publication
Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation
90.92 Standard to be revised
Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties
60.00 Standard under publication
Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties
90.92 Standard to be revised
Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions
90.93 Standard confirmed