Below is a listing of projects past and present carried out by the Saint Lucia Bureau of Standards.
Energy performance of buildings — Overall energy performance assessment procedures — Part 2: Guideline for using indoor environmental input parameters for the design and assessment of energy performance of buildings
60.60 Standard published
Rubber and plastics hoses and hose assemblies — Guide for use by purchasers, assemblers, installers and operating personnel
90.93 Standard confirmed
Health informatics — Guidance on standards for enabling safety in health software
60.60 Standard published
Electronic archiving — Selection of digital storage media for long term preservation
60.60 Standard published
Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1
60.60 Standard published
Welding — Comparison of standardised methods for the avoidance of cold cracks
90.93 Standard confirmed
Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles
60.60 Standard published
Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels
60.60 Standard published
Textiles — Determination of certain flame retardants — Part 3: Chlorinated paraffin flame retardants
60.60 Standard published
Impact test procedures for road vehicles — Rear seat positioning procedures for Hybrid III 5th percentile female dummy
60.60 Standard published
Road vehicles — Local Interconnect Network (LIN) — Part 5: Application programmers interface (API)
60.60 Standard published
Soil quality — Detection of water soluble chromium(VI) using a ready-to-use test-kit method
60.60 Standard published
Plastics piping systems — Multilayer M (metal) pipes — Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
90.93 Standard confirmed
Information and documentation — Risk assessment for records processes and systems
90.92 Standard to be revised
Dentistry — Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants
60.60 Standard published
Space systems — Space debris mitigation design and operation manual for spacecraft
60.60 Standard published
Space environment (natural and artificial) — Method of the solar energetic protons fluences and peak fluxes determination
60.60 Standard published
Document management — Environmental and work place safety regulations affecting microfilm processors
60.60 Standard published